SAE AMS5132 Steel, Bars, 0.90 - 1.03C
作者:标准资料网 时间:2024-05-02 22:24:25 浏览:8013
来源:标准资料网
Product Code:SAE AMS5132
Title:Steel, Bars, 0.90 - 1.03C
Issuing Committee:Ams E Carbon And Low Alloy Steels Committee
Scope:This specification covers a high-carbon steel in the form of bars.
MIL-DTL-13924D, DETAILED SPECIFICATION: COATING, OXIDE, BLACK, FOR FERROUS METALS (18 MAR 1999) [SUPERSEDING MIL-C-13924C]., This specification covers black oxide coatings applied to ferrous metals (wrought iron, carbon, low alloy, and corrosion resistant steels). Black oxide coatings, with or without a supplementary preservative treatment, may be used where a black surface is required. Only very limited corrosion protection, under mildly corrosive conditions, is obtained as a result of black oxide coating.
基本信息
标准名称: | 高精度加工中心 第2部分:立式机床 精度检验 |
英文名称: | High precision machining centres-Part 2: Accuracy tests for machines with vertical spindle |
中标分类: |
机械 >>
金属切削机床 >>
钻、镗、铣床 |
ICS分类: |
机械制造 >>
工业自动化系统 >>
机械加工中心
|
发布部门: | 中华人民共和国国家发展和改革委员会 |
发布日期: | 2007-10-08 |
实施日期: | 2008-03-01 |
首发日期: | |
作废日期: | |
提出单位: | 中国机械工业联合会 |
归口单位: | 全国金属切削机床标准化技术委员会 |
起草单位: | 北京机床所;交大昆机科技股份有限公司;北京铣床研究所等 |
起草人: | 张维、唐其寿、胡瑞琳、许立亭、钱文明、周斌成 |
出版社: | 机械工业出版社 |
出版日期: | 2008-03-01 |
页数: | 39页 |
批文号: | 21867-2007 |
书号: | 15111·8830 |
适用范围
JB/T 10793的本部分规定了高精度加工中心的几何精度、位置精度、工作精度检验的要求及方法。本部分适用于基本上具有四个数控轴线,其中三个线性轴线(X、Y、Z)行程至2000mm和一个回转轴线(B′)的高精度立式加工中心。线性轴线行程大于2000mm的高精度立式加工中心也可参照使用。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 金属切削机床 钻 镗 铣床 机械制造 工业自动化系统 机械加工中心